Plumbing & Gasfitting Services

Pricing depends on the type of work required. We provide upfront quotes and transparent pricing before commencing larger jobs.

Yes, we provide quotes and discuss all works with you before getting started.

Yes! We know that plumbing disasters don’t wait for business hours. Our local team is ready to respond quickly to urgent issues like burst pipes, major water leaks, or completely blocked toilets across Maroochydore and surrounding Sunshine Coast suburbs.

A sudden spike in your water bill usually points to a hidden leak. This could be a continuously running toilet flush, a dripping tap, or a concealed pipe leak underground or inside a wall. If you suspect a leak, give us a call and we can pinpoint and repair the issue before it causes property damage.

Absolutely. If you’ve already picked out your dream taps, toilet, or kitchen sink for a renovation, we are more than happy to take care of the professional installation. We’ll ensure it’s fitted perfectly, seals correctly, and complies with local plumbing regulations.

We handle a full suite of commercial services, including regular preventative maintenance, backflow prevention testing, TMV (Thermostatic Mixing Valve) commissioning, blocked drain clearing, grease trap installations, and complete commercial kitchen or bathroom fit-outs tailored to local business needs.

We prioritise commercial emergencies because we know that a major leak, gas fault, or blocked drain can completely halt your business operations. Our local Maroochydore team is on standby to dispatch a licensed commercial plumber to your site as quickly as possible to minimise disruptions.

Yes, we design custom preventative maintenance plans for commercial properties, schools, and retail centers. Regular inspections of your pumps, drains, hot water plants, and valves drastically reduce the risk of sudden, expensive breakdowns and ensure your business always passes council compliance audits.

Absolutely. We work alongside commercial builders and business owners to execute seamless shop fit-outs, cafe setups, and office renovations. We manage the entire plumbing layout, trade waste connections, and appliance installations to ensure everything is up to code and ready for trading.

A standard maintenance check involves inspecting your entire property for hidden leaks, testing water pressure, checking the seals and valves on toilets and taps, inspecting the hot water system for wear, and ensuring your drains are flowing freely. It’s a complete health check for your pipes.

Low water pressure is obvious when showers feel weak or washing machines take forever to fill. High water pressure is trickier but much more dangerous—telltale signs include banging pipes (water hammer) or vibrating taps. We can test your pressure and install a pressure-limiting valve to protect your appliances from bursting.

Yes, we work closely with local real estate agencies, property managers, and body corporates across the Sunshine Coast. We provide prompt maintenance, clear reporting, and straightforward communication to keep tenants happy and landlords protected from unexpected water damage.

For most residential properties, a professional plumbing inspection every 1 to 2 years is ideal. However, if you live in an older home with mature trees nearby, or if you manage a commercial space, annual maintenance checks are highly recommended to prevent tree roots from cracking underground pipes.

If you suspect a gas leak, turn off the gas supply at your main meter or cylinders immediately if it is safe to do so. Open your windows and doors, step outside away from the property, and avoid turning on any lights or electrical appliances. Call us immediately so a licensed gasfitter can locate and repair the leak.

In Australia, a Gas Compliance Certificate is a legal requirement for any new gas installation, modification, or major appliance hookup. It serves as proof that the work was carried out by a fully licensed professional and complies with all safety regulations. It is also vital for keeping your home insurance policy valid.

Absolutely. We regularly install high-efficiency continuous-flow gas hot water systems, bayonet points for indoor heating, and permanent gas lines for outdoor BBQs or fire pits. We ensure your supply has the correct pressure to handle any outdoor entertaining or high-demand appliance upgrades.

Yes, absolutely. Most gas appliances come out of the box set up for natural gas, which means they require conversion before you can safely connect them to LPG bottles. We can replace the burners with the correct LPG injectors (jets), adjust the regulators, and test the flame to ensure your new cooktop, stove, or BBQ operates perfectly and safely.

On average, most traditional electric tank hot water systems last between 8 to 12 years. If your system is over a decade old, showing signs of rust around the base, or regularly running out of hot water, it’s a good idea to have it inspected before it splits and causes flooding.

Yes, we look after complete hot water system conversions. Switching to a continuous-flow LPG gas hot water system is a great option if you want unlimited hot water on demand and want to free up space, as the units are compact and wall-mounted.

Heat pumps are highly efficient systems that extract heat from the surrounding air to heat your water, using up to 70% less electricity than a standard electric tank. They are incredibly popular on the Sunshine Coast due to our warm climate, and we can absolutely install one to help you cut down your household running costs.

If your hot water tank is actively leaking from the main cylinder, you should turn off the water supply valve connected to the tank and shut off the power at your main switchboard. Once that’s done, give us a call immediately so we can come out, assess the damage, and either repair the valve or arrange a fast replacement.

A constantly running toilet is usually caused by a faulty internal component inside the cistern, such as a worn-out inlet valve or a deteriorated rubber flapper sealing the bottom. This allows water to continuously leak into the bowl. We can quickly replace these inexpensive parts to stop the water waste and silence the noise.

In most cases, we can easily repair traditional taps by replacing the internal washers, O-rings, or ceramic cartridges and reseating the tap body. However, if the metal housing is badly corroded or split, we will recommend replacing them with a modern, durable tap style of your choice to ensure a long-lasting fix.

Yes, a toilet leaking from the base should be looked at quickly. This usually means the pan collar seal has failed, meaning contaminated water could be escaping onto your floor every time you flush. To prevent structural floor damage and hygiene issues, it’s best to call us out to reseal or reset the toilet as soon as possible.

Absolutely. Older showerheads and taps can use up to 15 to 20 litres of water per minute. By upgrading to modern, water-saving fixtures with a high WELS rating (Water Efficiency Labelling and Standards), water usage can be reduced to as little as 6 to 9 litres per minute without sacrificing water pressure, leading to noticeable savings on your Sunshine Coast water bill.

You will need us at two major stages. First is the “rough-in” stage, which happens right after stripping the old room down to the wall studs, where we relocate or upgrade the hidden pipes and drainage. The second is the “fit-out” stage, which takes place after the tiling is completely finished, where we install and seal your new taps, toilet, vanity, and shower screen.

You can absolutely change the layout! While keeping fixtures in their original positions is generally the most budget-friendly option, we can safely relocate water lines and waste pipes to suit a completely new design. We will inspect your floor structure (concrete slab vs. timber stumps) to determine the most cost-effective way to reroute the plumbing.

Yes. In Queensland, any plumbing work involving the modification of water supply lines or sewerage systems must legally be carried out by a licensed professional. Attempting a DIY installation or using an unlicensed handyman can lead to severe water leaks, structural rot, and will almost certainly void your home insurance policy if a failure occurs.

Absolutely. We can guide you through choosing high-quality, durable fixtures that not only look incredible but boast excellent WELS (Water Efficiency Labelling and Standards) ratings. Choosing the right modern mixer taps, water-saving toilet suites, and smart showerheads can drastically lower your household water and energy usage without losing performance.

Plumbing for a new build happens in three primary stages. The first is the “drainage or under-slab” stage, which is completed before the concrete slab is poured. The second is the “rough-in” stage, where water and gas lines are run through the wall frames before plastering. The final stage is the “fit-out,” where we install all your visible fixtures like sinks, toilets, and showers after painting and tiling are complete.

Yes, absolutely. We regularly collaborate with owner-builders to guide them through the complex plumbing and drainage requirements of a new home construction. We can assist with plan reviews, provide expert advice on layout efficiency, manage council plumbing applications, and ensure your project meets all mandatory building regulations.

Yes, because we are fully licensed in both plumbing and gasfitting, we handle the entire dual-service setup for your new build. This includes laying underground gas lines, installing LPG cylinder regulators, running internal gas lines for cooktops or heating, and taking care of the entire water and wastewater network, giving you a streamlined, single-point-of-contact trade experience.

Once the final fit-out is complete and fully tested, we provide all the necessary legal documentation required for your final building inspection and occupancy certificate (Form 7 / Plumbing Compliance Certificates). This includes official council sign-offs for your drainage and water lines, alongside mandatory Gas Compliance Certificates for any gas installations.

Stormwater drainage is designed exclusively to capture and carry rainwater from your roof, gutters, driveways, and yard back into the council’s street mains or natural waterways. Wastewater plumbing (sewerage), on the other hand, carries contaminated water from your toilets, showers, sinks, and washing machines directly to the utility sewage treatment plant. The two systems must legally remain entirely separate.

Persistent yard pooling is usually caused by poor ground sloping, heavily compacted clay soils that refuse to absorb water, or a blocked or collapsed underground stormwater pipe. We can assess your property’s levels and install custom surface pits, French drains, or agricultural pipes to efficiently collect that surface water and channel it away from your home’s foundations.

Tree roots naturally seek out moisture and nutrients, entering underground pipelines through tiny hairline cracks or loose pipe joints. As they grow, they completely block the pipe and trap debris. We use high-pressure water jetting to safely blast the roots out without tearing up your lawn, followed by a CCTV camera inspection to locate the break so we can repair or patch the section of pipe properly.

Yes, as a property owner, you are responsible for maintaining and repairing all stormwater pipes, gutters, and downpipes located within your property boundary line up to the point where they connect to the council’s legal point of discharge (usually the street curb or a dedicated council easement). If a blockage or break occurs inside your boundary, it is up to you to arrange a licensed plumber to fix it.

General repairs cover the wide range of everyday plumbing issues that occur around a home or business. This includes fixing noisy pipes (water hammer), replacing broken outdoor garden taps, repairing leaking shower bases, installing water filters, fixing faulty reticulation connections, and tracing mysterious damp spots in walls or ceilings.

A loud banging noise when you turn off a tap is a common phenomenon known as “water hammer.” It occurs when a high-pressure rush of water suddenly stops, causing a shockwave to ripple through your pipes. We can easily resolve this by adjusting your water pressure, securing loose pipe brackets behind your walls, or installing a water hammer arrestor to protect your appliances from damage.

Yes, absolutely. We regularly install high-quality inline water filters, reverse osmosis systems, and standalone filtered water taps for kitchens across the Sunshine Coast. We can also assist with routine maintenance, such as replacing old filter cartridges, to ensure your family always has access to clean, crisp drinking water.

Telltale signs of a concealed pipe leak include soft or discoloured patches on your plasterboard, peeling paint, a musty or damp smell in certain rooms, mold growth, or a water meter that continues to spin even when all your taps are turned off. If you notice any of these signs, contact us quickly so we can locate the source before it compromises your home’s structural framing.

Refrigerators with built-in ice makers or water dispensers require a connection to your mains water supply. We need to run a dedicated water line behind your fridge cavity, install a shut-off valve, and fit a pressure-limiting valve. This ensures the high water pressure common on the Sunshine Coast doesn’t burst the thin plastic lines inside your new fridge.

Yes, in most cases we can retrofit an InSinkErator or modern food waste disposal unit to your existing kitchen sink. We will modify the drainage trap beneath your sink to accommodate the unit and ensure it vents and drains perfectly into your wastewater system without causing stubborn kitchen sink blockages.

While some dishwashers can simply plug into existing connections, a licensed plumber is highly recommended if you are changing layouts, upgrading to a different brand with different hose requirements, or installing a dishwasher in a spot that hasn’t had one before. We ensure the water supply is secure and the drain hose is correctly looped to prevent wastewater from your sink backing up into your clean machine.

Steam ovens use hot steam to cook food healthily, and premium integrated or combi-steam ovens require a direct connection to your cold water supply, along with a dedicated drain line to carry away condensed water. We can easily rough-in the required pipework behind your kitchen cabinetry to make your high-end appliance upgrade seamless and fully compliant.

An under-sink water filter is a compact unit connected to a single tap (usually in your kitchen) to provide pure drinking and cooking water. A whole-house water filtration system is installed directly onto your property’s main water supply line, filtering all the water that enters your home—meaning every shower, basin, laundry tap, and garden hose benefits from filtered water.

For standard residential under-sink systems, filter cartridges should typically be replaced every 6 to 12 months, depending on your household’s daily water usage. Whole-house system cartridges are larger but generally follow a similar 12-month schedule to ensure your water pressure stays high and the filtration remains highly effective against contaminants.

Yes, absolutely. Installing a whole-house filter or a targeted system removes sediment, chlorine, and harsh minerals that naturally cause corrosion and scale buildup inside appliances. By filtering the water before it reaches your hot water system, washing machine, and dishwasher, you drastically extend their operational lifespan and reduce the need for plumbing repairs.

Yes. In Queensland, installing a water filter involves cutting into or connecting directly to your main potable water lines. This legally requires a licensed plumber to ensure the system is fitted with the mandatory backflow prevention and pressure-limiting valves, preventing accidental contamination of the water supply and protecting the filter casing from bursting under pressure spikes.